Archiwalne

Anybus-S Modbus-RTU

Anybus-S Modbus-RTU

Producent: Anybus
Producent: Anybus

AB4460 Anybus-S Modbus-RTU

  • Modbus RTU Slave functionality according to Modbus Protocol ref guide (PI-MBUS-300)
  • Total 512 bytes input & 512 bytes output via DPRAM (up to 2048 bytes IN/OUT with internal memory)
  • DPRAM parallel application interface
  • Baud rate (1200 bit/s - 57,6 kbit/s)
  • Full interchangeability with AnyBus-S modules for other networks
  • CE, UL & cUL Tested
  • RS-485 or RS-232 optically isolated Modbus interface with on-board DC/DC converter.
Na zamówienie

Darmowa dostawa

Promocja cenowa na model HDR-15-5

Produkt przeznaczony wyłącznie do zastosowań profesjonalnych
Anybus-S Modbus-RTU

Anybus-S Modbus-RTU

Opis

The Anybus-S Modbus RTU is available with a 2k byte parallel Dual Port Ram interface. Modbus station address and baud rate can be selected via switches on the front side of the module or by software via the application interface. A bus termination switch is located on the front side of the module. A DC/DC converter and optocouplers are provided onboard.

Specyfikacja

  • Specyfikacja techniczna
Wymiary: 54 mm x 86 mm x 15 mm
Napięcie zasilania: +5V max 210mA
Temperatura pracy: 0 to +70°C
Baud Rate:b 1200 bit/s - 57,6 kbit/s
I/O Input: 512 bytes
I/O Output: 512 bytes
Interfejs urządzenia: Równoległy
Komendy Modbus 1: Read Coil Status, Read Input Status, Read Holding Registers, Read Input Registers, Force Single coil
Komendy Modbus 2: Preset Single Register, Diagnostics (Subfunctions: 0, 10, 12, 13, 14 is supported), Force Multiple Coils, Preset Multiple Registers, Mask Write 4X Register, Read/Write 4X registers

Pliki do pobrania

Polecane produkty

Skontaktuj się z ekspertem
Telefonicznie +48 22 773 79 37
Przez formularz Wypełnij formularz